9. Unload the tape cartridge by doing the following:
Figure 18. Unloading the Tape Cartridge
10. Replace the cover of the drive (reverse the removal procedure).
11. Replace the drive (refer to "Removing and Replacing the Drive" on page 27).
Note: Service personnel should record on the service action report the error
34
7208 Model 345 Service Guide
a. At the left front of the drive, insert a 2.5-mm L-Hex wrench into the hole
marked UNLOAD ( 1 in Figure 18).
b. Turn the wrench in the direction marked on the drive (counterclockwise)
until the tape ejects.
message that displayed on the LCD and the fact that the tape cartridge had
to be manually removed.