Appendix A - gledhill mCHP BMA 225 Installation And Servicing Instructions

Table of Contents

Advertisement

APPENDIX A

WATER SAVINGS
WATER RELATED COSTS CAN BE REDUCED BY GOOD
PLUMBING PRACTICE.
TAPS & MIXERS
2 TAP
HALF OPEN
20 L/M
Unregulated
SHOWERS
Vast quantities of water are needlessly run off to waste due to
Taps, Mixers and Showers discharging flow rates far in excess
of the rates required for them to perform their duties.
The contrasting flow rates shown on this leaflet clearly illustrate
the savings that can be made whilst still providing a good
performance.
British made Aquaflow Regulators provide constant flow rates
by automatically compensating for supply pressure changes
between 1 bar & 10 bars.
To facilitate installation into the wide range of plumbing
equipment which is encountered in the U.K, Four Fixing Options
are available:-
OPTIONS FOR SHOWERS
1. MXF "DW" Range - For fitting behind Fixed Shower Heads
or onto Flexible Hoses for Handshowers (preferably onto
the inlet end when lightweight hoses are used).
2. Compression Fitting Range. "in Line" regulators as in Option
4 for Taps & Mixers.
AQUAFLOW REGULATORS LTD
Haywood House, 40 New Road, Stourbridge, West Midlands DY8 1PA
TELEPHONE (01384) 442611 FAX: (01384) 442612
OVER
Fitted with regulator
Unregulated
25 - 30 l/m
information by courtesy of
1
5, 6 OR
8 L/M
4 FIXING OPTIONS FOR TAPS &
MIXERS
1. MK Range - Combined Regulators & Aerator
for screwing onto Taps & Mixers with internal
or external threads on their noses. Anti Vandal
models also available.
Regulated
10 - 12 l/m
2. MR05-T Range - internal Regulators. Push-fit
into Tap or Mixer seats. Produced in three sizes
- 12.5mm (BS1010), 12mm & 10mm, Flangeless
models also available for Taps with Low Lift
washers.
3. MXF Standard Range - Screw on tail models for Taps
& Mixers. Fix onto the tails before fitting the tap
connectors. Available in 3/8", 1/2", 3/4" and 1" BSP.
4. Compression Fitting Range - "in Line" regulators
housed in 15mm & 22mm CXC Couplers &
isolating Valves. " "UK WFBS listed by the Water
Research Centre. isolation valves available for
slotted screwdriver operation or with coloured
plastic handles. Now available also in plastic
bodied push-fit couplers & valves.
1
2
2
1
3
4
3
Page 36
1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mchp bma 235

Table of Contents