Technical Information; The Heat Pump's Factory Settings; Sensor Table - IVT Greenline HT Plus C Assembly, Commissioning And Maintenance Manual

Technical information

Technical information

The heat pump's factory settings

The table shows the factory settings for all the settings that can
be changed by the installer.
Menu Setting
1.1 Temperature increase/decrease
1.2 Temp. fi ne-tune
1.3 Heat curve adjustment
1.4 Heat curve hysteresis
1.5 Mix. valve incr/decr
1.6 Mix. valve fi ne-tune
1.7 Adapting the mixing valve curve
1.8 Mix. valve curve neutral zone
1.9 Mixing valve curve max at GT4
1.10 Setting the room temperature
1.11 Setting the room sensor infl uence
1.12 Setting of holiday function
1.13 Remote control temperature
1.14 Setting of summer disconnection
2.1 Number of hours for extra hot water
2.2 Hot water peak menu is used
2.3 Setting of room hot water temperature.
2.4 Setting of DHW hysteresis
4.1 Clock setting HP accord. to clock
4.1.1 Setting level heat pump +/-
4.2 Clock setting additional heat according
to clock
4.3 Clock setting hot water according to clock
5.2 Select conn capacity electr. cass.
5.4 Select the function only additional heat
5.5 Select function additional heat
5.7 Selecting external controls
5.10 Selection of the operation alt. P2
5.11 Selection of the operation alt. P3
8.1 Setting the additional heat timers
8.3.4 Ramp time open
8.3.5 Ramp time close

Sensor table

The table shows all sensor resistance
at different temperatures.
Factor y Temperature (
setting
4
0º
0º
5º
4
0º
0º
3º
60º
20º
5
0 days
not active
18º
0 hours
not active
51º
4º
not active
0º
not active
not active
2/3
off
yes
0
P2 cont. operat
P3 with comp.
60 minutes
20 min
3 min
68
kΩ
ºC)
-40 154,300
-35 111,700
-30 81,700
-25 60,400
-20 45,100
-15 33,950
-10 25,800
-5 19,770
0 15,280
5 11,900
10 9,330
15 7,370
20 5,870
25 4,700
30 3,790
35 3,070
40 2,510
45 2,055
50 1,696
55 1,405
60 1,170
65 0,980
70 0,824
75 0,696
80 0,590
85 0,503
90 0,430