Menu Outline For Basic Functions (Customer Level 1); Select Scrolling Information On The Menu Display - IVT Greenline HT Plus C Assembly, Commissioning And Maintenance Manual

Basic functions - Customer level 1

Menu outline for Basic functions (Customer level 1)

080922 16:08:15 Fr
Heat
Temp. incr. / decr.
Page 16
Temp. fi ne-tune
Page 17
Room temperature
Page 18
Extra hotwater
Page 18
The menu display is standard
=
on all heat pumps.
=
The menu display is only
shown on the heat pump in
combination with an extra
sensor or for a specifi c model of
Greenline HT Plus.

Select scrolling information on the menu display

If you press the Info button in the initial menu you will receive continuous
information about the heat pump's operation and working temperatures.
This is what to do:
1. Press the Info button in the initial menu.
Here follows a few of the windows displayed:
Rego 637 K1
Info Menu
Indoor temperature
settings
STANDBY
Temperature settings
No rad heat required
Temp. incr. / decr.
No hotwater required
range 0-10
Page 15
HOTWATER MODE
Heat pump only
Temperature settings
Temp. fi ne-tune
Page 15
range -10/+10
HEAT RAD MODE
Compr. + Add. heat
Page 15
Temperature settings
Setting of room
HEAT RAD REQ
temperature
Heat pump starts
in #### seconds
Page 15
Main menu
Main menu
Adjusting the hot
1
water settings
Page 19
Hot water setting
Duration of
1.1
add. hot water
Page 16
1.2
Page 17
1.10
Page 18
14
Note
Each menu is numbered in the lower
right-hand corner; this indicates which
main display it is associated to.
Main menu
Monitor all
2 temperatures
Page 19
Temperature readings
Return radiator GT1
2.1
Temperature readings
Page 18
Out GT2
Temperature readings
Hot water GT3
Temperature readings
Shunt, fl ow GT4
Temperature readings
Room GT5
Temperature readings
Compressor GT6
Temperature readings
Heat trfl uid out GT8
Temperature readings
Heat tr fl uid in GT9
Temperature readings
Ht trfl d(coll)inGT10
Temperature readings
Httrfl d(coll)outGT11
Rego 637 K1
080922 16:08:15 Fr
Heat Info Menu
3
Page 19
Page 20