Set The Time And Date - IVT Greenline HT Plus C Assembly, Commissioning And Maintenance Manual

Extra functions - Customer level 2
3. Turn the menu dial until you reach menu Op. time readings on HP and
add. heat (menu 7).
4. Press the Select button and scroll through the menus with the menu dial.
The number of hours the heat pump has been in
operation
The menu shows the number of hours that the heat pump has been in
operation since the day of installation.
The heat pump's hot water mode and heating mode
operations as a percentage
The menu show the heat pump's allocation between hot water mode and
heating mode. The allocation is stated as a percentage.
The number of hours additional heat has been in
operation
The menu shows the number of hours additional heat has been in operation
since the day of installation.
Additional heat's hot water mode and heating mode
operations as a percentage
The menu shows the heat addition's allocation between hot water mode and
heating mode. The allocation is stated as a percentage.

Set the time and date

The heat pump has functions that are dependent on both the clock and date.
Thus it is important that these are correct. This is how to access the menu
Clock, setting time and date:
1. Press and hold the Heat button until Access = CUSTOMER2 is displayed.
2. Press the Menu button.
26
Main menu
Op. time readings on
HP and add. heat 7
Return Select
Op. time readings
Heat pump in operat.
number of hours? 7.1
Return Select
Op. time readings
Distribution HP
DHW-Rad in % 7.2
Return Select
Op. time readings
Add. heat in operat.
number of hours? 7.3
Return Select
Op. time readings
Distribut. add. heat
DHW-Rad in % 7.4
Return Select