Basic Functions (Customer Level 1); Menu Outline For Basic Functions (Customer Level 1) - IVT Optima 1000 Assembly, Commissioning And Maintenance Manual

Basic functions (Customer level 1)

Basic functions (
Basic functions (Customer level 1) are the functions most frequently used
and the ones you have the most benefi t of. You reach the basic functions
by pressing one of the Heat, Info or Menu buttons in the initial menu. The
designation K1 in the upper right corner indicates you are in Basic functions
(Customer level 1).

Menu outline for Basic functions (Customer level 1)

040216 16:08:15 Tu
Heat
Temp. incr. / decr.
Page 16
Temp. Þ ne-tune
Page 17
Room temperature
Page 18
Extra hot water
Page 18
The menu display is standard on all
=
heat pumps.
=
The menu display is only shown on the
heat pump in combination with an extra
sensor or in a specifi c operating mode.
Customer level 1
Rego 603 K1
Info Menu
Indoor temperature
settings
STANDBY
No rad heat req.
Temperature settings
No hot water req.
Temp. incr. / decr.
range 0-10
Page 15
HOT WATER MODE
Heat pump only
Temperature settings
Temp. Þ ne-tune
Page 15
range -10/+10
HEAT RAD MODE
Compr. + Add. heat
Page 15
Temperature settings
Setting of room
HEATING REQ
temperature
Heat pump starts in
#### seconds
Page 15
)
Main menu Main menu
Adjusting the hot
1
water settings
Page 19
Hot water settings
Duration of
1.1
add. hot water
Page 16
1.2
Page 17
1.10
Page 18
14
(Initial menu)
Customer level 1
Rego 603 K1
040216 16:08:15 Tu
Heat Info Menu
Date Time
Note
Each menu is numbered in the lower
right-hand corner; this indicates which
main display it is associated to.
Main menu
Monitor all
temperatures
2
Page 19
Temperature readings
Return radiator GT1
2.1
Temperature readings
Page 18
Out GT2
Temperature readings
Hot water GT3
Temperature readings
Mix valve ß ow GT4
Temperature readings
Room GT5
Temperature readings
Compressor GT6
Temperature readings
Heat trß uid out GT8
Temperature readings
Heat tr ß uid in GT9
Temperature readings
Condenser GT10
Day
3
Page 19
Page 20