KTM 2011 990 Supermoto R USA Owner's Manual page 80

TUNING THE CHASSIS
–
Take the weight off the rear wheel and swingarm.
Info
The spring preload can be adjusted correctly only if the rear wheel and the
swingarm are fully relieved of weight.
–
Loosen locking ring
–
Turn adjusting ring
Hook wrench (T106S)
–
Measure the overall spring length without a load.
–
Tension the spring by turning adjusting ring
Guideline
Spring preload
Comfort
101122-10
Standard
Sport
Full payload
–
Tighten locking ring
.

until the spring is no longer under tension.

to the prescribed value.

11 mm (0.43 in)
11 mm (0.43 in)
11 mm (0.43 in)
13 mm (0.51 in)
.

78