KTM 2011 990 Supermoto R USA Owner's Manual page 151

COOLING SYSTEM
–
Position the vehicle as shown and secure it against rolling. Height difference
be reached.
Guideline
Height difference
Info
To make sure that all of the air can escape from the cooling system, raise the
A 0 0 A
front of the vehicle. A poorly bled cooling system is less effective at cooling and
the engine can overheat.
400677-10
–
Remove the radiator cap and pour in coolant until it emerges without bubbles at the
vent hole, and then immediately mount and tighten the bleeder screw
Alternative 1
Coolant (
Alternative 2
Coolant (mixed ready to use) (
–
Fill the radiator completely with coolant. Mount the radiator cap.
–
Lean the vehicle on the side stand.
101162-10
–
Check the coolant level in the compensating tank. (
Danger
Danger of poisoning Exhaust gases are poisonous and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in an enclosed space without an effective
exhaust extraction system.
–
Start the engine and run it until it reaches operating temperature.
50 cm (19.7 in)

p. 194)
p. 194)
must

.

p. 145)
149