Installing The Front Wheel - KTM 2011 990 Supermoto R USA Owner's Manual

WHEELS, TIRES

Installing the front wheel

12.2
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
x
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is broken or worn:
–
Replace the wheel bearing.
–
Grease and mount the left and right spacers and the shaft seal rings.
Long-life grease (
–
Clean screw
–
Lift the front wheel into the fork, position it, and insert the wheel spindle.
–
Mount and tighten screw
Guideline
Bolt, front axle
101132-10
x
p. 199)
and wheel spindle .
 
.

M25x1.5 45 Nm
(33.2 lbf ft)
105