ELECTRICAL SYSTEM
–
Pull bulb holders
–
Remove the bulb.
–
Position a new light bulb in the holder.
Tail light (W5W/socket W2.1x9.5d) (
–
Carefully position the holders with the bulbs into the holder in the tail light.
–
Check that the tail light bulbs are functioning properly.
101152-10
–
Position the rear top part.
–
Mount and tighten screws
Guideline
Remaining chassis screws
101150-10
carefully out of the bracket.
p. 187)
.
M6
134
10 Nm (7.4 lbf ft)