Fuser Transfer Plate Removal - Lexmark T640 Service Manual

4061-xx0
8.
Remove the fuser cover.

Fuser transfer plate removal

1.
Remove the upper paper deflector. See
2.
Remove the transfer roll. See
3.
Remove the inner paper deflector. See
4.
Lift the left side of the fuser transfer plate (A), and move the plate to the left to clear the right side from its
mounting.
5.
Remove the screw that attaches the transfer plate ground wire to the center pan.
6.
Remove the fuser transfer plate.
7.
Remove the screw that attaches the deflector cable to the transfer plate.
4-44
Service Manual
"Upper paper deflector assembly removal" on page
"Transfer roll assembly removal" on page
"Inner paper deflector assembly removal" on page
4-80.
4-78.
4-48.