Fuser To Lvps Ac Cable Removal - Lexmark T640 Service Manual

Fuser to LVPS AC cable removal

CAUTION: Unplug the printer before you begin.
1.
Remove the fuser wick assembly cover. See
2.
Remove the redrive assembly. See
3.
Remove the right side cover. See
4.
Disconnect the fuser to LVPS AC cable (A) from the fuser lamp connector on the fuser, and remove the
cable through the cable retainer (B) and the lower rectangular opening (C) in the fuser frame.
5.
Remove the pass thru plate. See
6.
Disconnect the LVPS to system board DC cable (D) from the LVPS.
"Fuser wiper cover assembly removal" on page
"Redrive assembly removal" on page
"Right cover removal" on page
"Pass thru plate" on page
4-75.
4-9.
4-19.
Repair information
4061-xx0
4-5.
4-39