Documentation
Installing the Hard Drive
1.
Remove the new drive from its packaging.
Save the original packaging for storing or shipping the hard drive.
NOTICE:
Use firm and even pressure to slide the drive into place. If you use
excessive force, you may damage the connector.
2.
Insert the drive into the bay, and push the hard drive until it is fully seated in the
bay.
3.
Replace and tighten the two M2.5 x 5-mm screws.
4.
Use the Operating System CD to install the operating system for your computer.
5.
Use the Drivers and Utilities CD to install the drivers and utilities for your
computer.
Back to Contents Page
You are here:
© 2008 Dell
Large Text
sn EB14
2 of 2
Dell USA
>
Support Home Page
|
About Dell
|
Terms of Sale
http://support.dell.com/support/edocs/systems/ins5100/en/sm/hdd.htm...
|
Unresolved Issues
|
Privacy
|
Contact
|
Site Map
|
Feedback
Top
2008-03-11 10:23