Documentation
NOTICE:
Remove the speaker cables from their routing clips with care to avoid
damaging the cables.
9.
Remove the speaker cables from under or between their routing clips.
NOTICE:
Handle the speakers with care to avoid damaging them.
10.
Remove the speakers by pulling them straight up and out of the base plastics.
Installing the Speakers
1.
Slide the speakers down into the base plastics.
NOTICE:
Ensure that the speaker cables are under or between their routing clips.
NOTE:
Speakers face out in the base plastics holders.
NOTE:
The right speaker cable is longer than the left speaker cable.
2.
Route the speaker cables under or between their routing clips.
3.
Connect the speaker connector to the system board.
Back to Contents Page
You are here:
© 2008 Dell
Large Text
sn EB14
2 of 2
Dell USA
>
Support Home Page
|
About Dell
|
Terms of Sale
http://support.dell.com/support/edocs/systems/ins5100/en/sm/speakers...
|
Unresolved Issues
|
Privacy
|
Contact
|
Site Map
|
Feedback
Top
2008-03-11 10:28