Table of Contents
Advertisement
2. Installing the Modem
Hardware Installation
This chapter describes how to install the Modem and establishes network connections and may install the Modem on any level
surface
(e.g. a table or
plastic feet at the bottom to avoid scratches.
Pre-installation Requirements
Before the start of actual hardware installation, make sure to provide the right operating environment including power requirements,
sufficient physical space and proximity to other network devices that are to be connected.
Verify the following installation requirements:
Power requirements: DC 5V/1A or above.
The Modem should be located in a cool dry place with at least 10cm/4in of space at the front and back for ventilation.
Place the Modem out of direct sunlight and away from heat sources or areas with a high amount of electromagnetic interference.
Check if network cables and connectors needed for installation are available.
shelf). However, please take note of the following minimum site requirements before one begin. Stick the 4
4-Band VDSL CO/CPE MODEM USER'S MANUAL Ver. A.2
5
Advertisement
Table of Contents
