Dynamix 4-Band VDSL CO/CPE Modem User Manual page 10

Front Indicators
The modem has Five LED indicators. The following Table shows the description.
LEDs
PWR
(Power LED)
(Ethernet LED)
(VDSL LED)
(VDSL LED)
(VDSL LED)
Status
Steady
Green
Steady Green
E
Flashing
(LINK/ACT)
5
Steady Green
15
Steady Green
25
Steady Green
Table 1: LED Indicators Description and Operation
4-Band VDSL CO/CPE MODEM USER'S MANUAL Ver. A.2
(Table 1)
Descriptions
It will light up (ON) to show that the product is
power good, and system reset OK.
Each RJ-45 station port on the Ethernet is
assigned an LED light for monitoring port "Good
Linkage". LED is normally OFF after the power on
operation, but will light up steadily to show good
linkage and flashing to show data transmission.
RJ-11 station port on the VDSL is assigned an
LED light for monitoring port "Good Linkage". LED
is normally OFF after the power on operation, but
will light up steadily to show good linkage
5Mbps data rate.
RJ-11 station port on the VDSL is assigned an
LED light for monitoring port "Good Linkage". LED
is normally OFF after the power on operation, but
will light up steadily to show good linkage
15Mbps data rate.
RJ-11 station port on the VDSL is assigned an
LED light for monitoring port "Good Linkage". LED
is normally OFF after the power on operation, but
will light up steadily to show good linkage
25Mbps data rate.
10
at
at
at