Dynamix 4-Band VDSL CO/CPE Modem User Manual page 13

To set the data speed to 25Mbps simply switch ON pin 2 while the other pins are in reset mode. To change it to 15Mbps, switch ON
the pin 3 while the other pins are in reset mode and for 5Mbps switch on the pin 4 while other are in reset mode. Remember that no
two pins can be activated at the same time or it will result in error and for data speed of 5Mbps. Table shows the summary of DIP
switch configuration.
Speed mode Pin 1
Auto speed On
25Mbps Off
15Mbps Off
5Mbps Off
Table 3: DIP Switch Configuration
4-Band VDSL CO/CPE MODEM USER'S MANUAL Ver. A.2
Pin 2 Pin 3
Off Off
On Off
Off On
Off Off
13
Pin 4
Off
Off
Off
On