Attaching The Strap - FujiFilm WP-FXF200 Owner's Manual

Attaching the strap

1
Attach the strap to the waterproof case.
2
Tighten the hand strap around your wrist.
Opening the waterproof case using the adjuster of the strap
When opening the waterproof case, you can also use the adjuster of the strap if
you do not have the special pick.
■ For attaching the balance weight, see page 18.
Use the balance weight to maintain the correct buoyancy for the camera under water.
Use the balance weight as required.
Attach the strap to the waterproof case as
➀
shown in and
➀
Put your hand and wrist through the
hand strap.
➁
To reduce the risk of dropping the
camera, tighten the hand strap around
your wrist using the adjuster.
➀
Insert the adjuster's tab as shown in
the illustration.
➁
Release the lock of the open/close
knob.
Do not use the adjuster of the strap
to detach the O-ring. Water leaks may
result if the O-ring is damaged or
contaminated with foreign particles.
EN-15
➁
.