Table of Contents
Advertisement
Starting operation of your telephone
Text lines
The text lines provide information on the current call status or menu lists and texts. In the idle state, the
display shows the system name and internal call number, your programmed user name and the time.
Selection lists (e. g. telephone book) and the features menu are displayed in a three-line section of the
display. The lines are scrolled up or down by means of the arrow keys. An item that can be selected is
highlighted in a dark colour.
PABX Menu
Calls
Call diversion
Messages
OK
'
Softkeys and other keys
The two keys below the display, as well as the arrow keys, are known as softkeys. The functions
assigned to the keys are shown in the lowest line of the display. The key function changes automati-
cally according to the operating status of the handset.
Above the arrow keys you will see symbols that identify the individual functions of the arrow keys:
{}
¤
¬
'
Softkey: OK
Press OK to confirm the selected function. If a function only has one quickswitch
option, it is operated by this key. Active settings (ON) are indicated by a " "
behind the relevant item; inactive settings (OFF) are indicated by a "–".
8
ESC
When you are entering telephone numbers or names, you can make changes
by moving the cursor. The arrow keys then move the cursor to the beginning
or the end of the entry.
Enables selection from the redial list.
Enables selection of numbers from the telephone book.
Where a list is displayed, (e.g. telephone book or menu, move the cursor with
the arrow keys to the desired entry.
Handset /Loudspeaker /Headset
Volume symbol
Advertisement
Table of Contents
