Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for RIKA X-COOK
Summary of Contents for RIKA X-COOK
-
Page 7: Table Of Contents
CONTENTS Drawing explanation Technical Specification Packaging Parts overview 1. IMPORTANT INFORMATION General warning and safety instructions Before setting up 9 – 10 2. BRIEF HEATING INFORMATION Suitable fuels and fuel quantities Maximum fuel quantity Fuel quantities Clean burning Burning wood 3. -
Page 8: Technical Specification
TECHNICAL SPECIFICATION PARTS - OVERVIEW (Illustrated: Fitting dimensions) Description 1 Furnace door This is a Design 1 fire and has a connection for 2 Door glass fitting to a chimney that is equipped for other fires 3 Disk spring for handle and boilers for solid and liquid fuels, insofar as the 4 Handle chimney dimensions are in accordance with DIN... -
Page 9: Important Information
1. IMPORTANT INFORMATION -> Working with easily combustible and explosive Please read these instructions before installation and operation. Observe the national provisions and laws materials in the same or adjoining room to the fire is as well as the regulations and rules applicable locally. prohibited when the fire is on. - Page 10 1.2 flue pipe connection 1 . 7 Flue pipes are a particular hazard source in respect Design 1 fires (BA 1): of escape of poisonous gas and fire hazard. Obtain These fires must only be operated with the fire door the advice of an appointed specialist company in closed.
-
Page 11: Brief Heating Information
2. BRIEF HEATING INFORMATION SUITABLE FUELS AND FUEL FUEL QUANTITIES QUANTITIES The fire is equipped with flat firing due to the design. This means that only one layer of fuel In principle your fire is suitable for burning dry may be placed on the existing basic embers. billets. -
Page 12: Clean Burning
The challenges of the present day and age mean 2. CORRECT FIREWOOD that everyone must act responsibly. One of most QUANTITY AND FIREWOOD SIZE important matters of concern is retaining our natural world. Our products are developments that comply -> Too much firewood causes overheating. This with the most recent state of the art technology. -
Page 13: Installing The Fire
Care must be taken with this fire that the flue draught reaches at least the prescribed value (> 0.8 mbar). We recommend original flue pipes from the RIKA Should problems arise here, please contact your flue pipe range for professional connection. The... -
Page 14: Operation
4. OPERATION STARTING THE FIRE In order to keep exhaust emissions as low as The mineral parts of the wood (approx. 1%) remain possible, we would ask you to keep to the following starting instructions. on the bottom of the combustion chamber as combustion residue. -
Page 15: Ash Drawer
Caution: Embers could remain in the ash. Only THE FIRE PAINT ONLY HARDENS PROPERLY AFTER fill the ash into non-flammable containers and HEATING UP DURING USE. do not put the ash onto flammable surfaces. Do not touch the surface during heating. It is still soft. Our paints are completely harmless in accordance with the TÜV-certificate;... -
Page 16: Fitting Options
5. FITTING OPTIONS -> Connect a non-flammable pipe to the fresh air MAKING AN EXTERNAL nozzle (e.g.: Steel spiral pipe) and fix this using a COMBUSTION AIR FEED hose clip (not included in delivery!) (Optional: Fig: Panel) -> The line should not be longer than 4 m and have no bends in order to guarantee adequate air feed. -
Page 17: Maintenance And Cleaning
(free from corrosive acids and solvents - otherwise there is a risk of damage to the glass surface and/or inscription). RIKA glass cleaner is available from stove dealers. Moist firewood may be the cause of excessive sooting of the glass. -
Page 18: Problem Solving
7. PROBLEM SOLVING What to do if? Problem Reason Solution 1. Ceramic glass In principle: From time to time pane soots up too (dependent on use), each glass pane quickly must be cleaned with a glass cleaner Poor draught Clarify this with the chimney sweep (if necessary increase height of chimney) Incorrect regulation Regulation must be carried out as per... -
Page 19: Ceramic Hob Assembly Instructions
2) The box also contains the decorative screws and silicon washers (small Minigrip bags). 3) Lay the ceramic hob on the X-COOK stove and check the hole positions (Ceramic hob holes should be aligned exactly with the cast cover). -
Page 20: We Guarantee
For the purpose of timely damage limitation, the controller. warranty claim on the part of the claimant is to be enforced at the RIKA dealer in writing using the Damage arising from non-observance of the invoice and stating the purchase date, model name, manufacturer’s instructions for operation of the unit... - Page 24 G A R A N T I E G U A R A N / G A R A N T I E G U A R A N T E E Purchase day: / Date d’achat: Kaufdatum: / Purchase day: Trader stamp / Cachet du revendeur Händlerstempel: / Trader stamp: Model designation: / Nom du modèle:...
- Page 25 G A R A N T I E G U A R A N T E E Kunde: / Customer: Marke Stamp An: / To: G U A R A N T E E G A R A N Z I A Client: / Cliente: Marque Marca...
Need help?
Do you have a question about the X-COOK and is the answer not in the manual?
Questions and answers