Connection to the chimney ��������������������������������������������������������������������������������������������������������������������������������������������������������������������10 Connecting to a steel chimney ���������������������������������������������������������������������������������������������������������������������������������������������������������������10 Combustion air ���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������10 Feeding in external combustion air ���������������������������������������������������������������������������������������������������������������������������������������������������������10 5. OPTION REAR CONNECTION / SWINGING SWING Converting to rear flue pipe connection �������������������������������������������������������������������������������������������������������������������������������������������������11 Model version swinging Swing ���������������������������������������������������������������������������������������������������������������������������������������������������������������11 6. MANUAL OPERATION Combustion air regulation ����������������������������������������������������������������������������������������������������������������������������������������������������������������������12...
RIKA stoves should only be installed in rooms with normal humidity (dry areas according to VDE 0100 Part 200). The furnaces are not splash water protected and may not be installed in wet areas.
Prior to set up Stoves type 1 (BA 1): Suitable for multiple occupancy. (Note the different country regulations.) Floor bearing capacity Ensure that the substructure is capable of bearing the weight of the stove prior These may only be operated with the combustion chamber door closed. to set-up.
3. BRIEF INFORMATION ON COMBUSTIBLE - LOGS Suitable fuels and fuel amounts Output controlling Your stove is generally suitable for burning dry firewood. You can also burn The output of your stove is regulated manually or via the Rikatronic-control. combustibles such as wood briquettes. Please observe that the output of your stove also depends on the chimney draught and the amount of fuel added.
Ø50mm (pellet stoves) and fix it with a hose clamp (not included!). We recommend original flue pipes from RIKA for proper connection. At pellet stoves with longer intake pipes than 1m the diameter should be increased to 100mm. (see RIKA range).
5. OPTION REAR CONNECTION / SWINGING SWING Model version swinging Swing Note Only work on the unit when the mains plug has been disconnected and the Lift the locking bolt at the rear side from its initial position using the handle.
RIKA f irelighter Always ignite the RIKA firelighter on the red tip. One block consists out of 8 ribs which can be divided to the desired size. The amount of RIKA firelighters also depends on the size and humidity of your firewood. Ideally, one rib is enough to light up the fire.
7. CLEANING AND MAINTENANCE Basic information Note Never use abrasive or aggressive cleaning agents to clean the wooden door handle, these will damage the wood. Note When you vacuum clean around the stove ensure that you do not vacuum into the combustion air intake during heating operation.
8. PROBLEMS - POSSIBLE SOLUTIONS Problem 1 Problem 2 Fire burns with weak, orange flame, window is sooted up. Stove smells strongly and / or fumes are emitted. Cause(s) Cause(s) Poor chimney draught Burning-in phase (taking into service) Damp wood Stove has accumulated dust and/or dirt Possible solution(s) Incorrect heating up...
Page 15
In case of doubt as well as missing or incorrect translations, the German version is the only valid one. For the purpose of timely damage limitation the claimant is required to file the warranty claim with the RIKA dealer in writing, submitting the invoice and stating the purchase date, model name, serial number and reason for complaint.
Need help?
Do you have a question about the Swing and is the answer not in the manual?
Questions and answers