See Also "Flexible Gas Connection; 2-Stage 24 Volt Thermostat - Schwank SET - SETU Installation And Owner's Manual

Two stage low intensity tube type infrared heaters

Hide thumbs Also See for SET - SETU:

Table of Contents

18. WIRING DIAGRAM - HONEYWELL S87J1034

24 VOLT TWO STAGE GAS VALVE – USING 24V TWO STAGE THERMOSTAT

(FOR MULTIPLE HEATERS PER THERMOSTAT SEE NEXT PAGE)

Each tube heater requires 120V, 60 HZ electrical power sized for 145VA. The heater includes

a 24V/120V relay switch . Maximum power flow for internal 24V burner components is 21VA.

The heater must be electrically grounded in accordance with the National Electrical Code.

ANSI / NFPA 70 or current Canadian Electrical code CSA C22.1.

A maximum night set-back of 9°F (5°C) is recommended for optimum economy and comfort.

To maintain satisfactory comfort levels do not turn off the heating system over night/weekends.

Maximum Power Flow = 21VA

GP-MSET-EX-6A

SET(U) / ITT(U) Manual

RD: MAY 2009

RL: 06A - BA

Table of Contents