Table of Contents
Advertisement
LEGACY Control System operations–overview
OPERATING THE CAR DOORS IN THE LEGACY ENVIRONMENT
E
ach car features a lighted interior and opening doors. In the LEGACY environment, the
doors are opened and closed using the CAB-2. Press the doors OPEN and CLOSE icon on
the CAB-2 after loading the Subway module. See Figure 2.
Additionally, the doors can be opened and closed using the AUX1 and AUX2 and F and R coupler
buttons, if you have not loaded the module to the CAB-2.
To open the left side doors, press AUX1, F. To close the doors, press AUX2, F then AUX2. To
open the right doors, press AUX1, R. To close the doors, press AUX2, R then AUX2. You may
choose to lock the doors from opening on a certain side using the switches located under the roof-top
hatch on each car. The switches are illustrated in Figures 3 on page 7.
Any open door will close automatically as the train begins to move, unless they are locked
Note!
in the open position.
As the Subway begins to move, the interior lights will dim
Note!
A door error will occur any time that the doors try to move (either open or close) and do
Note!
not complete the cycle after four tries. If this error occurs, the interior lights will begin
to flash. This can be reset by using the R button on the CAB2 or AUX1, 0 on either the
CAB1 or CAB2.
Doors can only be opened on one side at a time. If the doors are open on one side, the
Note!
doors on the other side will not open.
Figure 2. OPEN and CLOSE icon on the CAB-2
Right door OPEN
Right door CLOSE
Left door OPEN
Left door CLOSE
Advertisement
Table of Contents
