Contec CMS-50E User Manual page 9

finger finger is is is out out and intermittent
finger out and and intermittent intermittent alarm
（Actual probe may be different with the probe as figure 3,please accept the actual probe with the
B. B. B. Change Change Change display display display direction: direction: direction:
On the measuring interface, you can change the display direction by pressing the button shortly.
C. C. C. Pause Pause alarm:
Pause alarm: alarm:
a) a) a) Alarm including the alarm of measure data's going beyond the limits, the alarm of low-voltage,
the alarm of finger's out of position.
b) b) b) On the measuring interface, if the alarm function is on, during the period of alarming, you can
pause it by pressing the button shortly, but the function will be renewed in about 60 seconds.
c) c) c) If you want to turn off the alarm for good, you should enter the menu for operation.
D. D. D. Menu Menu Menu operations: operations: operations:
On the measuring interface, , the display direction can be changed by pressing the power button with
alarm will occur.
alarm will will occur. occur.
(a)
(b)
Figure 3
device ）
6