ITS Telecom CGW-T4 Installation And Programming Manual page 15

Operation
DTMF support option (CDMA
only)
Verification of the Telephone
Number
Display the SIM telephone
number on the LCD for 5 seconds
when in programming mode.
(GSM only)
Conversation Time-Out
The telephone conversation will
be automatically terminated after
this time-out.
End Dialing Digit
Define "#" as the digit that
indicates the end of a dialed
number, causing the unit to
immediately start dialing.
(GSM only)
Pulse drop (Loop Disconnect)
Activate the pulse drop feature
by defining time for loop
disconnect for conversation end
state signaling to PBX.
Call barring (number of restricted
numbers reduced to 8).
Command
*350 + X, where:
X = 1 enabled; X = 0 disabled
*360
*390 + XX
where:
XX = number of minutes
00 = unlimited
*370 + X
where:
X = 0 End dialing digit disabled
X = 1 End dialing digit enabled
("#" indicates end of number)
*380 + XX
where:
XX = time in tenth of seconds.
For example:
X = 10=1000 milliseconds = 1
second
X = 01 = 100 milliseconds
Legal values: 00-99
Note: If this feature is activated
together with reverse polarity (*320)
'Pulse drop' occurs after polarity is
reversed.
*400 + XX + YYYY + #
where:
XX = 01 to 08 (list number of
restricted numbers)
YYYY – up to 4 digits (0-9)
restricted prefix
- 13 -
CGW-T4 Installation and Programming Manual
Default
00 (unlimited)
00
(Feature disabled)
None
1