C&K systems System 238 User Manual page 7

P OWE R
LIGHT
PERIMETER ARMED
WITH DELAY ZONES
CONVERTED TO INSTANT
ZONE TROUBLE
ZONE(S) IS OR
WAS IN ALARM
ZONE BYPASSED
LOW BATTERY
slow flash
BELL FUSE FAILURE
WATCHDOG RESET
COMMUNICATIONS
F A I L U R E
PROGRAMMING
MODE
READY ARMED SERVICE
LIGHT LIGHT LIGHT
slow flash slow flash
slow flash
slow flash on*
slow flash
on steady
on steady
slow flash
fast flash
slow flash slow flash slow flash
ZONES
REMARKS
L I G H T S
slow flash Armed with 4 7 #.
*Flashing zones are bypassed.
slow flash Service and zone in trouble.
Flash at the same rate.
fast flash An alarm has occurred on this zone.
*Armed light is on if the system is armed.
slow flash Ready and bypassed zone flash at the
same rate.
Call for service.
Call for service.
Panel has reset itself. System OK. To reset the
Service Light, press * 1 #.
Call for service.
System is in programming mode.
7