Fora Diamond Mini Owner's Manual page 13

STEP 3. Apply blood sample
Obtain a drop of blood of at least 0.5 µL using a lancing device. Use the
clear cap for sites other than fingers and refer to the strip package insert
for more details.
Gently apply the drop of blood to the absorbent hole of the test strip at a
titled angle. Confirmation window should be completely filled if enough
blood sample has been applied. Do NOT remove your finger until you hear
a beep sound.
If the confirmation window is not filled completely before the meter
begins to count down, do not add more blood to the test strip. Discard the
test strip and start again. If you have trouble filling the test strip, please
call your local customer service number for assistance.
NOTE :
If you do not apply a blood sample within 3 minutes, the meter will automatically
turn off. You must remove the test strip and insert it back into the meter to
restart the test.
Warning:
• Please do not change your treatment based on the result without first
consulting your health care professional.
• Turn the meter off by removing the test strip. Discard the used test strip and
lancet carefully according to your local regulations.
12
STEP 4. Get result
The result of your blood glucose test will
appear after the meter counts down to 0.
The blood glucose result will be stored in
the memory automatically. (100 mg/dL=
5.6 mmol/L).