Table Of Contents; Important Information Parts Required; Caring For Your Stainless Steel; Tools, Hardware - Monogram ZIFI240 Installation Instructions Manual

CONTENTS
Design Guide (For ZIFS240 and ZIBS240)
The Installation Space..................................................................................4
Product Clearances ......................................................................................4
Side-by-Side Installations ..........................................................................4
Design Guide (For ZIFI240 and ZIBI240)
The Installation Space..................................................................................5
Product Clearances ......................................................................................5
Side-by-Side Installations ..........................................................................5
Important Information
Parts Required................................................................................................3
Caring for Your Stainless Steel ..................................................................3
Tools, Hardware ............................................................................................3
Staining Wood Drawer Fronts ..................................................................3
Install Water Line ..........................................................................................3
Installation Instructions
Step 1, Remove Packaging and Installation Parts ................................6
Step 2, Install Custom 3/4" Door Panel and Handle
(ZIFI240 and ZIBI240 models only) ........................................................6, 7
Step 3, Leveling ..............................................................................................7
Step 4, Connect Water Supply (ZIBI240 and ZIBS240 models only) ......7
Step 5, Connect Power ................................................................................8
Step 6, Slide Product into Cutout ..............................................................8
Step 7, Set Temperature Controls..............................................................8
ZIFI240 AND ZIBI240 MODELS ONLY
PARTS REQUIRED
• Custom handle
• Assembled overlay panel
• Screws

INSTALL WATER LINE

• Water line can enter the opening through the floor or back
wall. The water line should be 1/4" O.D. copper tubing or
GE SmartConnect ™ kit between the cold water line and
water connection location, long enough to extend to the
front of the refrigerator. Installation of an easily accessible
shut-off valve in the water line is required.
• A cold water supply is required for automatic icemaker
operation. The water pressure must be between 20 and 120 p.s.i.
• Route GE SmartConnect
copper tubing between house cold water line and the water
connection location.
• Install an optional water filter in the water line near the
refrigerator. A water filter is recommended in areas where
the water supply contains sand and particles. Installation
Instructions are packed with the filter.
NOTE: The only GE approved plastic tubing is supplied in
the GE SmartConnect ™ Refrigerator Tubing kits. Do not use
any other plastic water supply line because the line is under
pressure at all times. Other types of plastic may crack or
rupture with age and cause water damage to your home.
GE SmartConnect ™ Refrigerator Tubing Kits are available
in the following lengths:
2' (0.6 m) WX08X10002
6' (1.8 m) WX08X10006
Installation Instructions
PARTS SUPPLIED
• Handle side trim
• Optional black or
stainless steel toekick
(ZIBI240 AND ZIBS240 MODELS ONLY)
™ plastic tubing or 1/4" O.D.
15' (4.6 m) WX08X10015
25' (7.6 m) WX08X10025

CARING FOR YOUR STAINLESS STEEL

• Before installation or first use, we strongly advise that
you polish the stainless steel exterior and handle with
a commercially available stainless steel cleaner such as
Stainless Steel Magic.
finish, we also strongly advise that you apply stainless
steel cleaner monthly.
TOOLS/HARDWARE REQUIRED
• Adjustable wrench
• Carpenter's glue (ZIFI240 and ZIBI240 models only)
• Screwdriver (ZIFI240 and ZIBI240 models only)

STAINING WOOD DRAWER FRONTS

The drawer fronts are unfinished cherry wood. During
use, oil from hands may accumulate and stain the wood.
• The drawer fronts may be stained and sealed to match
adjacent cabinetry.
• Apply the stain and sealer according to the
manufacturer's instructions. To avoid unpleasant odor,
keep the door open to ventilate and allow the
stain/sealer to dry completely before using the product.
Water Line
Shut off the main water supply.
Turn on the nearest faucet long enough to clear the line
of water.
• Install a shut-off valve between the icemaker water valve
and cold water pipe in a basement or cabinet. The shut-off
valve should be located where it will be easily accessible.
• Turn on the main water supply and flush debris. Run about
a quart of water through the tubing into a bucket. Shut off
water supply at the shut-off valve.
NOTE: Saddle type shut-off valves are included in many
water supply kits. Before purchasing, make sure a saddle type
valve complies with your local plumbing codes.
NOTE: Commonwealth of Massachusetts Plumbing Codes
248CMR shall be adhered to. Saddle valves are illegal and
use is not permitted in Massachusetts. Consult with your
licensed plumber.
3
™ To preserve and protect the fine
Water Line
9"
Shaded Area
max.
1/2"
10-1/2"
Floor 1-1/2"
min.