Nat Settings; Rport; Stun - Pirelli Discus DP-L10 User Manual

8 Chapter
If you encounter any problems, make sure that your IP Router or ISP is not
blocking any traffic, specifically on the RTP ports. Also ensure that the router
is not blocking UDP traffic. You can contact your network administrator or ISP
for more information.
For additional assistance please refer to your Service Provider's Help Desk.
8.5
These settings are relevant to the ability of the phone to traverse the AP's NAT
(Network Address Translation function).
Press OK key
Scroll down key

8.5.1 RPORT

Select from the main menu with the
/ Shift left key
1. From the idle mode, press
(WLAN) >
2. Select
3. Press

8.5.2 STUN

1. From idle mode, press the
(WLAN) >
2. Enter the Enable, it will display the STUN options menu, select these
items with the arrow
82

NAT settings

(Menu) >
(NAT settings) four times.
/ Shift right key
OK key >
(RPORT)
Enable/Disable
Right soft key
OK key >
> Scroll down key
Scroll up key
Scroll down key
Scroll up key
:
OK key (Menu) >
Scroll up key (NAT
to end the RPORT settings.
OK key (Menu) >
Scroll up key (NAT
> OK key (STUN)
/ Scroll down key
(WLAN) > OK key
/ Scroll down key
Scroll down key
settings) > OK key
Scroll down key
settings) > OK key
.
>