Wlan; Wlan Status - Pirelli Discus DP-L10 User Manual

8.

WLAN

The Dual mode phone has been pre-configured to work with any open wireless
network. The phone will obtain an IP address automatically once it recognizes
and connects to the WLAN network.
Any modifications made to the internal configuration of this device, not
expressly approved by your service provider will void the warranty of this
device.
Press Ok key (Menu) >
key .
The WLAN settings interface allows you to check WLAN network status, and
set profiles. It includes five functions,
status, SIP settings,
8.1

WLAN status

By means of this menu it is possible to know which WLAN network settings are
currently stored and working.
In detail, the following information is available:
Dual Mode telephone), SSID: (connected WLAN names: WLAN Modem,
Access-Point), Authentication
none), BSSID: (MAC Address of connected WLAN Modem), Channel:
(channel used. Available values 1-13 depending on the WLAN Modem),
Signal strength, Phone IP , Subnet mask,
server, Sec. DNS server, WMM status
Example 1: the left bar above the G-symbol displays the GSM network's
strength. To make the network usable, there should be at least three bars
displayed on the screen.
Scroll down key
WLAN
NAT settings and WMM power
type: (used protection: WEP, WPA, WPA2 or
and
(one time) (WLAN) >
status, WLAN settings,
saving.
Phone MAC (MAC address of
Gateway, DHCP server , Pri. DNS
WMM power save status.
Chapter
OK
SIP
73
8