Wlan Settings; Select Wlan Profile - Pirelli Discus DP-L10 User Manual

8.2

WLAN settings

To use the Dual mode phone, you can use different WLAN profiles. To setup
the profile with a security rule, the corresponding WLAN-AP (Access Point)
information should be known. So doing, when you are in a WLAN area for
which you already create a profile, by selecting it, the phone will register to the
WLAN-AP automatically.

8.2.1 Select WLAN Profile

Before you set the access to WLAN network, select a profile, and check if the
profile is set and active.
A WLAN network can be added either when the network is detected (the
Network Indicator icon is showing in the idle screen) or manually by entering
WLAN-AP information.
1. Press OK key
> Scroll down key
2. Press OK key
- Home: when you set a WLAN in house, use this profile and save the
Home WLAN info.
- Office: when you set a WLAN in office, use this profile and save the
Office-WLAN info.
- Hotspot: Set the WLAN in the Hotspot when you have the operator of the
Hotspot.
- Profile 4 or 5: you can define 2 more profile.
- All profiles: to set a generic profile.
Information:
Use All profiles only when you want your phone to select the profile
automatically. When you want to set one profile for one WLAN-AP, do not
select it.
You can change the profile title/name. Read the Chapter WLAN Profile
Rename.
(Menu) > Scroll down key
(WLAN settings)
(Active settings) to select a profile between:
Chapter
(WLAN) > OK key
75
8