Wlan Access Setup - Pirelli Discus DP-L10 User Manual

8 Chapter
Information:
Activate the WLAN network only when it has searched AP/Routers in the
wireless area. This would save battery power.

8.2.2 WLAN Access Setup

You can set up the access to WLAN via any broadband access device (DSL,
Cable or company LAN) as long as the network is reliable.
- SSID: (Service Set Identifier) the name of the network, it is expressed by
the alphanumeric characters.
a) Set SSID by site survey
1. Press
security
are found nearby with good signal strength.
2. Select the AP's SSID
b) Set SSID manually
1. Press
security
- Security Setting: for WLAN security and encryption setting
a) Set security
1. Press
security
set.
- Open:= It sets no encryption.
- WEP:= WEP encryption, for WEP key settings. The key must be
entered in hexadecimal or ASCII format: A-F and 0-9. On the right top
corner, a counter decrements and reaches zero as all characters have
been entered.
76
Menu > WLAN > WLAN settings
> SSID > Site survey.
Menu > WLAN > WLAN settings
> SSID > Manual.
Menu > WLAN > WLAN settings
> SSID > Security.
> Edit act. settings
The display shows a list of all APs which
> Edit act. settings
Input SSID in the SSID edit window.
> Edit act. settings
The display shows the security items to be
> SSID &
> SSID &
> SSID &