Information:
If VoIP is not displayed when all the settings are completed, please repeat the
above steps.
If you encounter any problems, make sure that your IP Router or ISP is not
blocking any traffic, specifically on the RTP ports. Also ensure that the router
is not blocking UDP traffic. You can contact your network administrator or ISP
for more information.
For additional assistance please refer to your Service Provider's Help Desk.
8.5
These settings are relevant to the ability of the phone to traverse the AP's NAT
(Network Address Translation function).
PAT (Port Address Translation function).
8.5.1 RPORT
Select from the main menu with the
WLAN Status
1. From the idle mode, press
(WLAN) >
(Rport)
2. Select
3. Press
VoIPon
www.voipon.co.uk
NAT Settings
NAT Settings
>
OK key
>
Enable/Disable
Right soft key
to end the Rport settings.
sales@voipon.co.uk
Up
/
Down
OK key
(Menu) >
Scroll up
(NAT
Tel: +44 (0)1245 808195
Chapter
/
Left
/
Right
Scroll down
settings) >
OK key
Fax: +44 (0)1245 600030
8
:
81