Sharp CD-MD3000H Service Manual page 36

CD-MD3000H/CD-MD3000W
Operation/Input table for MD test mode 1
Button/Remoto
Main unit
control input
[POWER] O
[EQ] O
[X-BASS] O
[PLAY] O
[REV PLAY] O
[TAPE REC] O
[STOP] O
[FF/CUE] O
[REW/REV] O
[JOG UP] O
[JOG DOWN] O
[DISP/CHARACTER] O
[MENU] O
[LOADING SW] O
[MD EJECT] O
1. Preparation for adjustment
Type
1 High reflection disc TGYS1 (SONY) [for Playback]
2 Low reflection disc Recording minidisc
3
4 Low reflection disc Pre-adjustment disc [TEAC Test MD]
Transmission
Remoto
command
control
to MD
O ___
O B 2 h
O B 4 h
O F 2 h
O A 8 h
O A 2 h
O A 7 h
O A A h
O A C h
F 3 h
F 4 h
O F 5 h
O 1 F h + D 1 h Single press To the operation mode without auto adjustment
B 5 h
B 3 h
Test disc
SONY 80 minutes disc is recommended.(example:PRISM 80)
Head Adjusting transparent
Pressing
time
Single press Turning on/off the power of the set.
When the power of the set is in the on state, it is
turned off; when it is in the off state, it is turned on.
Single press Test mode menu feed. To the servo adjustment
mode (Feed of the menu for the adjustment and
EEPROM)
Single press Test mode menu feed. To the recording mode
(Feed of the menu mainly for the continuous
playback and continuous recording)
Single press Test mode menu feed. To other modes
(Feed of the menu of the INNER mode,
JUMP SELECT, etc.)
Single press Menu reverse feed in each mode.
(Effective in each test mode)
Single press Decision of the menu select or start of its execution.
Single press Cancellation of each test item and transition to the
menu select of one higher order
Single press 1) Outer periphery feed of the slide motor (FWD).
Continuous Continued outer periphery feed
press 2) Execution of JUMP
3) Address set value UP
Others
Single press 1) Inner periphery feed of the slide motor (REV).
Continuous Continued inner periphery feed
press 2) Execution of JUMP
3) Address set value DOWN
Others
___ 1) Forced UNLOAD feed of a disc
2) Adjustment value +1
___ 1) Forced LOAD feed of a disc
2) Adjustment value -1
Single press 1) Laser switching in the EJECT mode
2) Display switching during continuous playback
Others
___ Execution of normal loading operation
Single press Execution of normal eject operation
Test disc
– 36 –
Function
Part No.
RRCDT0101AFZZ
––––––––––––
RRCDT0103AFZZ
88GMMD-318 or
88GMMD-213AS