Locations Of Key Components And Connectors - IBM x3630 M3 Product Manual

Locations of key components and connectors

Figure 2 shows the front of the models with 2.5-inch drives (top) and 3.5-inch drives (bottom).
Figure 2. System x3630 M3 - Front view
Figure 3 shows the rear of the server. Either four 2.5-inch hot-swap drives (as shown) or two 3.5-inch
hot-swap drives can be installed using one of the optional rear hot-swap SAS/SATA hard disk drive
cages.
Figure 3. System x3630 M3 - Rear view
IBM System x3630 M3 5