Specifications - IBM UPS3000 LV Installation And Maintenance Manual

Specifications

The uninterruptible power supply includes the following specifications.
Table 1. UPS3000 LV and UPS3000 HV specifications
Height
Width
Depth
Additional clearance
Weight
Operating temperature at
0 to 3000 m (0 to 10,000 ft)
Maximum operating
altitude
Relative humidity
Nominal input voltage
Maximum input current
Input voltage range for
main operations
Input voltage adjustable
range for main operations
Nominal output voltage
Input frequency
Rated power output
Output power capacity in
watts
Circuit breakers
Fixed power cord
Input connection type
Power outlets
Audible noise at 1 meter
Online thermal dissipation 171 Btu per hour
UPS3000 LV
89 mm (3.5 in.)
482.6 mm (19.0 in.)
622.3 mm (24.5 in.)
25 mm (0.98 in.) for circuit
breakers
3 mm (0.12 in.) for outlets
37.0 kg (82.0 lb)
0°to 40°C (32° to 104°F)
2000 m (6562 ft)
0 to 95% noncondensing
120 V
30 amps
90 to 144 V
77 to 152 V
120 V
50/60 Hz +/-4 Hz (auto sensing) 50/60 Hz +/-4 Hz (auto
2880 VA
2700 W
Three supplemental circuit
breakers rated at 15 amps, one
for each load segment
Length: 12 ft; Nema L5-30P
connection to source
One L5-30R outlet
Six 5-15R outlets
<45 dBA normal
<50 dBA Battery mode
UPS3000 HV
89 mm (3.5 in.)
482.6 mm (19.0 in.)
622.3 mm (24.5 in.)
25 mm (0.98 in.) for circuit
breakers
3 mm (0.12 in.) for outlets
37.0 kg (82.0 lb)
0°to 40°C (32° to 104°F)
2000 m (6562 ft)
0 to 95% noncondensing
220 V ac (selectable from
200-240 V ac))
16 amps
160 to 288 V
154 to 288 V
220 V, configurable for 200,
220, 230, or 240 V
sensing)
3000 VA
2700 W
Three supplemental circuit
breakers rated at 15 amps,
one for each load segment
IEC-320 C20, connection to
source using country
specific line cords
Six IEC C13 outlets
One IEC C19 outlet
<45 dBA normal
<50 dBA Battery mode
171 Btu per hour
Chapter 1. Introduction
3