Limitations On Pressure Washing; Product Documents - Raymarine SmartPilot X-5 Operating Manual

Tiller & gp tiller
Hide thumbs Also See for SmartPilot X-5:
Table of Contents

Advertisement

iv

Limitations on pressure washing

CAUTION: Do not pressure wash Raymarine products
Raymarine products must NOT be subjected to water pressures in
excess of CFR46 / IPX6 standards (for example, as generated by
commercial high pressure washing equipment). Products subjected
to water at these high pressures may experience water intrusion and
subsequent failure.
Raymarine products are waterproofed to CFR46 / IPX6 standards, which means that
when installed and operated in accordance with the appropriate product
documentation, they can be used in most weather and sea conditions. However, any
exposure to high-pressure water that exceeds the CFR46 / IPX6 standards, on or
around Raymarine products will invalidate the warranty for those products.

Product documents

This document is part of a series of books associated with the SmartPilot X-5 series.
All documents can be downloaded from:
www.raymarine.com/handbooks.
Title
SmartPilot X-5 Tiller and GP Tiller Operating Guide
SmartPilot X-5 Tiller and GP Tiller Installation and Setup Guide
ST6002 Controller Installation sheet
ST6002 SmartPilot Controller - Tiller Quick Reference Guide
Fluxgate Compass Installation sheet
Warranty Booklet
To the best of our knowledge, the information in the product documents was correct
when they went to press. However, Raymarine cannot accept liability for any
inaccuracies or omissions in product documents.
In addition, our policy of continuous product improvement may change specifications
without notice. Therefore, Raymarine cannot accept liability for any differences
between the product and the accompanying documents.
SmartPilot X-5 Tiller & GP Tiller Operating Guide
Part
number
81303
87075
87058
86131
87011
80017

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents