3
Entering the addresses directly
"Direct input" refers to the operation of directly inputting the destination
address from the machine's control panel.
1
Press the [Scan] key on the control
panel.
The Scan mode screen appears.
2
Touch [Direct Input], then [Scan to SMB].
A screen for entering the destination host name, destination folder, and
other information appears.
Why is the Direct Input tab not displayed?
?
% If the [Manual Destination Input] on the Security Details screen
(displayed by touching [Security Setting] on the Administrator
Setting screen) is set to [Restrict], the Direct Input tab does not
appear.
3-44
Scanning documents
bizhub C351 (Phase3)