Konica Minolta bizhub C351 Network Scanner Operations page 287

Specifying settings from the control panel
4
Touch [Fwd. ].
TCP Socket Setting screen 2/2 appears.
5
Specify the desired settings.
6
Touch [OK].
Note
To display the Administrator Setting screen, refer to "To display the
administrator setting screen" on page 4-10.
Note
To cancel changes to the setting, touch [Cancel].
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, cancel the Utility mode
by touching [Close] in each screen until the screen for the Copy, Fax,
Scan or Box mode appears.
When a certificate is set to "Enable" on this machine, the [SSL Setting] or
[Port Number (SSL)] screen appears. To perform SSL transmission,
specify the settings.
To perform external server authentication on this machine, the TCP
socket SSL settings are required to access this machine from the
application that is using the TCP socket.
bizhub C351 (Phase3)
4
4-157