To Specify Status Notification Settings - Konica Minolta bizhub C351 Network Scanner Operations

4

To specify status notification settings

1
In the Administrator Setting screen, touch [5 Network Setting]. (Refer to
page 4-10 for more details.)
2
In the Network Setting screen, touch [9 Detail Setting].
3
In the Detail Setting screen, touch [3 Status Notification Setting].
– To quit specifying the Utility mode setting, touch [Exit] in the sub
display area. Otherwise, cancel the Utility mode by touching [Close]
in each screen until the screen for the Copy, Fax, Scan or Box mode
appears.
– Refer to "E-mail TX (SMTP) parameters" on page 4-106 for more
details.
The Status Notification Setting screen appears.
4
Specify the desired settings.
4-128
Specifying settings from the control panel
bizhub C351 (Phase3)