Konica Minolta bizhub C351 Network Scanner Operations page 414

5
Item
No.
LDAP Server Name
Server Address
Port No.
Enable SSL/Port No. (SSL)
Search Base
Timeout
Max Search Results
Authentication Method
Login Name
Password
Domain Name
Select Server Authentication
Method
Use Referral
Initial Setting for Search Details
[Check Connection] button
5-112
Specifying settings Using PageScope Web Connection
Description
Displays the LDAP server number.
Enter the LDAP server name.
Enter the LDAP server address (syntax: "***.***.***.***" or
FQDN where the input range of *** is 0 to 255). Symbols "-"
and "." can be used.
Enter the port number used to communicate with the LDAP
server (input range: 1 to 65535).
Specify whether to perform communications with the LDAP
server using SSL/TLS.
Enter the search start point of the LDAP search (up to 255
characters).
Enter the LDAP search timeout (input range: 5 to 300 sec-
onds).
Enter the maximum number of hits to be received as the LDAP
search result (input range: 5 to 1000).
Set the LDAP authentication method.
Enter the login name if authentication is not set to "anony-
mous" (up to 255 characters).
Enter the password if authentication is not set to "anony-
mous" (up to 128 characters).
Enter the domain name if authentication is set to "GSS-SPNE-
GO" (up to 64 characters).
Select the LDAP server authentication method.
Specify whether to use the referral setting. When referral is
used, the search base that was specified in LDAP Sever Set-
ting searches the top and bottom levels as the starting point.
Specify the conditions to perform LDAP detailed searches.
Select OR, AND, Begins With, or Ends With for Name, E-Mail,
Fax Number, Last Name, First Name, City, Company Name,
and Department.
Click to check the connection to the LDAP server using the
specified settings.
bizhub C351 (Phase3)