Konica Minolta bizhub C351 Network Scanner Operations page 158

4
6
Touch [Destination].
– To select from registered destinations:
Check that [Select from Address Book] is selected, touch the
button for the desired destination type, and then select the
destinations to be registered.
– To enter the destinations directly:
Touch [Direct Input], touch the button for the desired destination
type, and then enter the destination to be registered.
7
Touch [Close].
– To register scan settings, touch [Yes] beside "Scan Setting". For
details on the scan settings, refer to "Specifying the scan settings"
on page 3-48.
– To register communication settings, touch [Yes] beside
"Communication Setting". Specify the file name for saving the file
and e-mail notification settings.
8
Touch [OK].
The program destination is registered.
Note
The registration cannot be completed unless settings have been
specified for "Name" and for "Destination", "Scan Setting", or
"Communication Setting".
!
Detail
To check the registered destination, touch the button for the destination,
and then touch [Check Setting].
To change the registered destination settings, touch the button for the
desired destination, and then touch [Edit].
To delete the registered destination, touch the button for the desired
destination, and then touch[Delete].
4-28
Specifying settings from the control panel
bizhub C351 (Phase3)