Table of Contents
Advertisement
Tomcat i7221 S5150
4.13. 6 Add/Delete Hotspare
===Adaptec SATA HostRAID Controller #0 Array Configuration Utility===
Main Menu
Manage Array
Create Array
Add/Delete Hotspare
Configure Drives
Display, Add, Delete hotspare
Create a drive spare:
1.
Select option Add / Delete Hotspare and press the <Enter> key to create the drive spare.
The following prompt is displayed:
Do you want to create a spare? (Yes/No):
2.
Press Y to create the drive spare.
3.
Press Esc to return to the previous menu.
Delete a drive spare:
1.
Select option Add / Delete Hotspare and press the <Enter> key to delete the drive spare.
The following prompt is displayed:
Do you want to delete the spare? (Yes/No):
2.
Press Y to delete the drive spare.
3.
Press Esc to return to the previous menu.
4.13.7 Initialize Drives
If an installed disk does not appear in the disk selection list for creating a new array or if it
appears grayed out, you may have to initialize it before you can use it as part of an array.
Drives attached to the controller must be initialized before they can be used in an array.
===Adaptec SATA HostRAID Controller #0 Array Configuration Utility===
Main Menu
Manage Array
Create Array
Add/Delete Hotspare
Configure Drives
Prepare drives for creating arrays.
Chapter 4: SATA/RAID Setup (for SATA RAID model)
4-32
http://www.tyan.com
Advertisement
Table of Contents
