Table of Contents
Advertisement
Tomcat i7221 S5150
4.12.3 Successful Creation
If the manual volume creation process was completed successfully, the following dialog
window will appear:
4.13 Configure BIOS for Adaptec RAID for Serial ATA on Board
(Supports RAID 0/1 with 2X SATA ports-SATA 1& SATA 2 only,
The motherboard supports RAID 0 or 1 for Serial ATA drives through the Intel
The Serial ATA as RAID option must be enabled in the BIOS before the system can load the
®
Adaptec
RAID option ROM code for Intel
standard PnP (Plug and Play) option ROM that provides a pre-operating system user interface
®
for the Intel
RAID implementation. It also allows the boot order to be selected from within the
BIOS setup utility.
For this information, please check Tyan's web site at:
4.13.1 BIOS Configuration
1.
Enter the BIOS setup program by pressing the <F2> key after the Power-On Self Test
(POST) memory test begins.
Chapter 4: SATA/RAID Setup (for SATA RAID model)
SATA 3 & SATA 4 not working)
Before installing the driver into an existing system, backup any important
or useful data. Failure to follow this accepted PC practice could result in
data loss.
The Intel RAID feature is available in Win2003 and Win2003.
http://www.tyan.com
®
RAID. The Adaptec
www.tyan.com
Warning
4-27
®
ICH6R chipset.
®
RAID option ROM is a
Advertisement
Table of Contents
