Remote Mounting Hardware - Invacare Spectra Blitz User Manual

8.1

Remote mounting hardware

Fixed joystick mounting arm
This type of mounting arm can move the joystick position either away from or towards the armpad.
This can be set according to comfort and arm length as follows. There is no height adjustment
other than to vary the armrest height. Refer to "Armrest Adjustment" on page 44.
Adjustment
• Unscrew the small adjustment handwheel
located on the underside of the armrest.
• Slide the joystick to the desired position.
Tighten the handwheel.
Installing / Removal
• Turn off the controller and unplug the
controller communication cable (if applicable)
• Unscrew the small handwheel located on the
underside of the armrest.
• Slide the joystick mounting arm through / into
the clamping tube until it comes away / is at
the desired position.
• If installing re-tighten the small handwheel.
40