Installing / Removing Back Cushion - Invacare Spectra Blitz User Manual

9.3.5

Installing / Removing Back Cushion

Caution:
• This adjustment should only be made when the chair is unoccupied and the joystick unit
switched off.
Installing / Removing
NOTE:
The cushion inner can be removed from the fabric cover by sliding it out from the cover flap on
the underside of the cushion.
• Ensure the hook and loop fastener strip on the back is visible (remove covering strip if
necessary, or fitted).
• Position the cushion on the back with the wedge shapes at the bottom and push down to
secure.
• To remove, pull up on cushion to release the hook and loop fastening. Remove cushion from
back.
50