2N EasyGate User Manual page 24

BabyCall timeout [s]
Time between line Off-Hook and automatic call beginning (if enabled). During this
timeout EasyGate waits for dialing that cancels the automatic call. You can make
standard call if the BabyCall function is enabled.
Setting options: 0-15 s
Setting step:
Default setting: 0 s
Transmission volume
Volume setting for GSM transmission with a 4 dB step.
Setting options: 1-5
Setting step:
Default setting: 3 = medium volume level
Reception volume
Volume setting for GSM reception with a 4 dB step.
Setting options: 1-5
Setting step:
Default setting: 3 = medium volume level
CLIP
Set this item to enable/disable identification of a telephone line calling from a
GSM network. The function can be enabled if you have a device on your
telephone line that is capable of receiving FSK according to ETSI standards.
Setting options:
Disable
FSK during ringing
Tbd.
Default setting: Do not transmit.
Replace character + in CLI by
If this parameter is filled, the + character in the international prefix of CLI is
replaced by the defined string. The + character can neither be transmitted by the
FSK protocol nor dialed by the DTMF from a terminal.
Setting options: 0-15 characters (0-9,*,#)
Default setting: blank
Line reversal indication for call in progress
Select call in progress signaling by telephone line polarity reversal. There is
voltage of reversed polarity on the telephone line during the whole call.
Setting options: YES/NO
Default setting: NO
8.3.2. Routing Parameters
All parameters related to the number dialed for an outgoing call are arranged in this
table. According to the prefix you can:
1 s
1
1
-EasyGate does not transmit the CLI.
-EasyGate transmits the FSK-based CLI according to the
ETSI EN 300 659 standard (transmission during ringing).
- prepared for future use
19
Function No.:
Function No.:
Function No.:
Function No.:
Function No.:
Function No.:
-
10
11
19
-
-