Table of Contents
Advertisement
Control Box Installation
1
'
1 0
x
M a
Install Receiver within 10 ft of control box (longer lengths avail-
able - call us). NOTE: NEVER splice receiver cable. DO NOT
run cable through conduit containing AC wire. DO NOT place
receiver within 3 feet of AC power.
Use the transmitter to check the range of the receiver before permanently mounting it.
Consider the following when mounting the receiver:
• Standard receiver cable length is 10 feet (receivers with a longer cable are available as special
order items; call the GTO Sales Department). NEVER splice receiver cable!
• Run the cable through PVC conduit to protect it from damage.
• DO NOT run cable through conduit containing AC wire.
• DO NOT place receiver within 3 feet of AC power.
• DO NOT coil excess cable or store it in the control box.
• Do not mount upside down.
• The receiver range can vary depending upon weather, topography, and external interference.
1. Mount the receiver high and above any obstructions; fence
pickets, column caps, etc.
2. If radio control seems limited try moving the receiver 1-2 feet
in each direction to reduce radio noise "dead spots."
Receiver Installation
Tips
2
Check Receiver reception before permanently securing to fence
or post. NOTE: If mounting on metal fence, mount receiver on a
piece of wood. DO NOT mount upside down.
FCC Regulation
This device complies with FCC rules Part 15.
Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that
may cause undesired operation.
Transmitter distance may vary due to circumstances
beyond our control. NOTE: The manufacturer is
not responsible for any radio or TV interference
caused by unauthorized modifications to
this equipment. Such modifications could
void the user's authority to operate
the equipment.
21
W
W
Advertisement
Table of Contents
