Table of Contents
Advertisement
Gate Opener Installation
Mounting Push-to-Open Opener to Gate
Your Property
1
I
V
PTO
Bracket
347IH
11"
I
S
R
Y
Assemble post bracket parts. NOTE: A Push-to-Open Bracket
347IH is required for this type of installation (not included).
3
With gate in CLOSED position, using clamps, secure opener to
gate post and center cross member of gate.
4
Remove clevis pin from the gate bracket and support loose
opener.
2
Q
Attach opener to gate bracket and secure with hardware re-
quired.
Reinforcement and Gate Bracket Mounting
Muffler Clamp
(not supplied)
Panel
Gate
1" x 6" Wood Reinforcement
Recommended reinforcement and gate bracket mounting
examples.
5
2
Swing gate to OPEN position. Check clearance/binding by inspecting the
alignment. Secure post pivot bracket to post bracket when clearance is OK
in both open and closed positions. TIP: Turning the pivot bracket over
gives more hole alignment options for the post pivot bracket assembly.
15
X
B
M
Gate
Bracket
Thin Walled
Tube Gate
Mounting Plate Created for Decorative Gate
(required but not supplied)
Gate
Bracket
FRONT VIEW
Top View
Recommend 11" to 19"
1
Open
Closed
Position
Position
2" minimum
2
pinch-point clearance
Q
X
M
F
Gate
Bracket
Wood or Metal
Reinforcement
(not supplied)
SIDE VIEW
Advertisement
Table of Contents
