Silvercrest OMC807 User Manual page 12

11 Optical sensor
Inserted USB nano receiver
12
13 On/Off button
14 Charging contacts
Open the battery compartment on the bottom of the wireless
mouse.
Insert the supplied rechargeable battery (size AA) into the
wireless mouse and make sure that the battery is properly
aligned according to the polarity (+ and -) (see figure).
Remove the USB nano receiver
Close the battery compartment.
Press the On/Off button (13) on the bottom of the wireless
mouse to power it on.
Plug the USB cable of the charging cradle into a free USB port
on your powered-on computer. The charging indicator (10)
blinks. Please wait a moment until the charging indicator stops
blinking.
Place the wireless mouse onto the charging cradle.
During charging the charge indicator (10) will light orange.
When the charging process is completed, the charging indicator
will light green.
If the indicator light (8) on the upper side of the
wireless mouse lights orange, the rechargeable
battery is exhausted. Then place the wireless mouse
onto the charging cradle.
Should the wireless mouse fail to work, power it off
and back on. Sometimes removing and re-inserting
the batteries will also help.
Mouse with charging cradle OMC807
English - 11